I spoke with Rhino-Rack, and they informed me that the tool that comes with the:
-Rhino-Rack SX Series Legs for Vortex Aero Crossbars # RRSX100 is 7" long. view full answer...
The Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package # HM43374 for your 2009 Lexus GX470 has the following mounting hole pattern. From the top holes to the bottom holes are spread 1-1/2" from hole center to hole center. From left to right the holes are spread 2-1/4" from center hole to center hole. view full answer...
We went out to our warehouse and measured an overall height with the mounting bracket of 5 inches for the Timbren Rear Suspension Enhancement System # TTORSEQ. Timbren recommends having a 1/2 inch to 1-1/2 inches between the spring and the axle when the truck is empty so if you measure between the frame where your bump stop is mounted and the axle and get greater than 6-1/2 inches you will want to fill that gap with a spacer or two.
We have 1 inch Spacers with # TA25723-90AD00 or 1/2 inch... view full answer...
The center to center spacing between the mounting holes in the Replacement Hardware Kit for Curt SecureLatch Pintle Mount # C52CR are 1-3/4". view full answer...
The Hollywood Racks Sport Rider SE 4-Bike Platform Rack # HR1400Z referenced in your question features a hitch pin hole diameter of 5/8 inches.
This particular bike rack does include a hitch pin lock to secure it to the vehicle, but just in case you do not have this, you can use the Hollywood Racks Hitch Lock # HRLHP2. For the hitch lock and cable lock kit, you can use # HRLHPC2. view full answer...
The measurement of the center of hitch pinhole to the back of the shank that goes towards the front of your vehicle for the Convert-A-Ball Ball Mount, Item # AMSC2, is 2-3/4 inches. Another key measurement is from center of hitch pinhole to the center of the hitch ball hole which is 9-1/2 inches. Finally, the distance from center of hitch pinhole to start of ball mount piece is 5 inches.
This Convert-A-Ball Ball Mount has a polyurethane interior that absorbs shocks and reduces vibrations.... view full answer...